1. 安装BBR

wget -N --no-check-certificate "https://github.000060000.xyz/tcp.sh" && chmod +x tcp.sh && ./tcp.sh

2.安装Nginx 

apt install nginx

查看状态并添加开机自启

systemctl start nginx
systemctl status nginx.service
systemctl enable nginx.service

3. cerbot部署证书

apt install snapd 
systemctl enable --now snapd.socket
ln -s /var/lib/snapd/snap /snap
snap install snap-store
snap install core;  snap refresh core
snap install --classic certbot
ln -s /snap/bin/certbot /usr/bin/certbot
certbot --nginx

4.修改/etc/nginx/nginx.conf配置文件 

stream {
    server {
        listen              443 ssl;                    # 设置监听端口为443

        ssl_protocols       TLSv1.2 TLSv1.3;      # 设置使用的SSL协议版本

        ssl_certificate /etc/nginx/ssl/xx.com.pem; # 证书地址
        ssl_certificate_key /etc/nginx/ssl/xx.com.key; # 秘钥地址
        ssl_session_cache   shared:SSL:10m;             # SSL TCP会话缓存设置共享内存区域名为
                                                        # SSL，区域大小为10MB
        ssl_session_timeout 10m;                        # SSL TCP会话缓存超时时间为10分钟
        proxy_protocol    on; # 开启proxy_protocol获取真实ip
        proxy_pass        127.0.0.1:1234; # 后端Trojan监听端口
    }
}

请将上方代码添加到http与events中间一行
/etc/nginx/nginx.conf配置文件参考：

events {
    worker_connections 768;
    # multi_accept on;
}

stream {
    server {
        listen              443 ssl;                    # 设置监听端口为443

        ssl_protocols       TLSv1.2 TLSv1.3;      # 设置使用的SSL协议版本

        ssl_certificate /etc/nginx/ssl/xx.com.pem; # 证书地址
        ssl_certificate_key /etc/nginx/ssl/xx.com.key; # 秘钥地址
        ssl_session_cache   shared:SSL:10m;             # SSL TCP会话缓存设置共享内存区域名为
                                                        # SSL，区域大小为10MB
        ssl_session_timeout 10m;                        # SSL TCP会话缓存超时时间为10分钟
        proxy_protocol    on; # 开启proxy_protocol获取真实ip
        proxy_pass        127.0.0.1:1234; # 后端Trojan监听端口
    }
}

http {

    ##
    # Basic Settings
    ##

继续重载nginx检查是否报错

systemctl restart nginx.service

注意事项：

  1. 请配置SSL证书
  2. proxy_pass 127.0.0.1:1234 后端Trojan监听端口与您网站前端节点监听端口一致
  3. listen端口可以1-65535随意修改，此处为客户端连接端口

5.部署XrayR 

bash <(curl -Ls https://raw.githubusercontent.com/XrayR-project/XrayR-release/master/install.sh)

配置文件路径：/etc/XrayR/config.yml

XrayR Trojan配置

- ListenIP: 127.0.0.1
- EnableProxyProtocol: true
- EnableFallback: true
- CertMode: none
- 注意1：请务必确保CertMode为none，交由Nginx处理tls
- 注意2：在回落时请确保回落站点是http1.1，nginx如果有一个站点是h2会导致全部站点都变成h2（巨坑）

完整样例

 -
PanelType: "SSpanel" # Panel type: SSpanel, V2board, PMpanel
ApiConfig:
ApiHost: "https://xxx.com"
ApiKey: "123"
NodeID: 1
NodeType: Trojan # Node type: V2ray, Shadowsocks, Trojan
Timeout: 10 # Timeout for the api request
EnableVless: false # Enable Vless for V2ray Type
EnableXTLS: false # Enable XTLS for V2ray and Trojan
SpeedLimit: 0 # Mbps, Local settings will replace remote settings, 0 means disable
DeviceLimit: 0 # Local settings will replace remote settings, 0 means disable
RuleListPath: # /etc/XrayR/rulelist Path to local rulelist file
ControllerConfig:
ListenIP: 127.0.0.1 # IP address you want to listen
SendIP: 0.0.0.0 # IP address you want to send pacakage
UpdatePeriodic: 60 # Time to update the nodeinfo, how many sec.
EnableDNS: false # Use custom DNS config, Please ensure that you set the dns.json well
DNSType: AsIs # AsIs, UseIP, UseIPv4, UseIPv6, DNS strategy
EnableProxyProtocol: true # Only works for WebSocket and TCP
EnableFallback: true # Only support for Trojan and Vless
FallBackConfigs: # Support multiple fallbacks
-
SNI: # TLS SNI(Server Name Indication), Empty for any
Path: # HTTP PATH, Empty for any
Dest: fake.website.com:80 # Required, Destination of fallback, check https://xtls.github.io/config/fallback/ for details.
ProxyProtocolVer: 0 # Send PROXY protocol version, 0 for dsable
CertConfig:
CertMode: none # Option about how to get certificate: none, file, http, dns. Choose "none" will forcedly disable the tls config.
CertDomain: "node1.test.com" # Domain to cert
CertFile: /etc/XrayR/cert/node1.test.com.cert # Provided if the CertMode is file
KeyFile: /etc/XrayR/cert/node1.test.com.key
Provider: alidns # DNS cert provider, Get the full support list here: https://go-acme.github.io/lego/dns/
Email: test@me.com
DNSEnv: # DNS ENV option used by DNS provider
ALICLOUD_ACCESS_KEY: aaa
ALICLOUD_SECRET_KEY: bbb

7.重启并检查 Nginx 和 XrayR 

systemctl restart nginx
XrayR restart
systemctl status nginx
XrayR status